Transactions
Token Transfers
Tokens
Internal Transactions
Coin Balance History
Logs
Code
Read Contract
Write Contract
- Contract name:
- CakeToken
- Optimization enabled
- true
- Compiler version
- v0.6.12+commit.27d51765
- Optimization runs
- 5000
- EVM Version
- default
- Verified at
- 2022-11-23T08:09:25.937342Z
Contract source code
// File: bsc-library/contracts/interfaces/IBEP20.sol pragma solidity >=0.4.0; interface IBEP20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the token decimals. */ function decimals() external view returns (uint8); /** * @dev Returns the token symbol. */ function symbol() external view returns (string memory); /** * @dev Returns the token name. */ function name() external view returns (string memory); /** * @dev Returns the bep token owner. */ function getOwner() external view returns (address); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address _owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); } // File: @openzeppelin/contracts@3.3.0/utils/Address.sol pragma solidity >=0.6.2 <0.8.0; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{ value: amount }(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{ value: value }(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } // File: @openzeppelin/contracts@3.3.0/math/SafeMath.sol pragma solidity >=0.6.0 <0.8.0; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } // File: @openzeppelin/contracts@3.3.0/GSN/Context.sol pragma solidity >=0.6.0 <0.8.0; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } // File: @openzeppelin/contracts@3.3.0/access/Ownable.sol pragma solidity >=0.6.0 <0.8.0; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor () internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } // File: bsc-library/contracts/BEP20.sol pragma solidity >=0.4.0; /** * @dev Implementation of the {IBEP20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {BEP20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-BEP20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of BEP20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IBEP20-approve}. */ contract BEP20 is Context, IBEP20, Ownable { using SafeMath for uint256; using Address for address; mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor(string memory name, string memory symbol) public { _name = name; _symbol = symbol; _decimals = 18; } /** * @dev Returns the bep token owner. */ function getOwner() external view override returns (address) { return owner(); } /** * @dev Returns the token name. */ function name() public view override returns (string memory) { return _name; } /** * @dev Returns the token decimals. */ function decimals() public view override returns (uint8) { return _decimals; } /** * @dev Returns the token symbol. */ function symbol() public view override returns (string memory) { return _symbol; } /** * @dev See {BEP20-totalSupply}. */ function totalSupply() public view override returns (uint256) { return _totalSupply; } /** * @dev See {BEP20-balanceOf}. */ function balanceOf(address account) public view override returns (uint256) { return _balances[account]; } /** * @dev See {BEP20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {BEP20-allowance}. */ function allowance(address owner, address spender) public view override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {BEP20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {BEP20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {BEP20}; * * Requirements: * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for `sender`'s tokens of at least * `amount`. */ function transferFrom( address sender, address recipient, uint256 amount ) public override returns (bool) { _transfer(sender, recipient, amount); _approve( sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance") ); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {BEP20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue)); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {BEP20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero") ); return true; } /** * @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing * the total supply. * * Requirements * * - `msg.sender` must be the token owner */ function mint(uint256 amount) public onlyOwner returns (bool) { _mint(_msgSender(), amount); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer( address sender, address recipient, uint256 amount ) internal { require(sender != address(0), "BEP20: transfer from the zero address"); require(recipient != address(0), "BEP20: transfer to the zero address"); _balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance"); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal { require(account != address(0), "BEP20: mint to the zero address"); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal { require(account != address(0), "BEP20: burn from the zero address"); _balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance"); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens. * * This is internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal { require(owner != address(0), "BEP20: approve from the zero address"); require(spender != address(0), "BEP20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Destroys `amount` tokens from `account`.`amount` is then deducted * from the caller's allowance. * * See {_burn} and {_approve}. */ function _burnFrom(address account, uint256 amount) internal { _burn(account, amount); _approve( account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance") ); } } // File: farms-pools/contracts/CakeToken.sol pragma solidity 0.6.12; // CakeToken with Governance. contract CakeToken is BEP20("HashBit Pad", "PAD") { /// @dev Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef). function mint(address _to, uint256 _amount) public onlyOwner { _mint(_to, _amount); _moveDelegates(address(0), _delegates[_to], _amount); } // Copied and modified from YAM code: // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol // Which is copied and modified from COMPOUND: // https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol /// @dev A record of each accounts delegate mapping(address => address) internal _delegates; /// @dev A checkpoint for marking number of votes from a given block struct Checkpoint { uint32 fromBlock; uint256 votes; } /// @dev A record of votes checkpoints for each account, by index mapping(address => mapping(uint32 => Checkpoint)) public checkpoints; /// @dev The number of checkpoints for each account mapping(address => uint32) public numCheckpoints; /// @dev The EIP-712 typehash for the contract's domain bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)"); /// @dev The EIP-712 typehash for the delegation struct used by the contract bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)"); /// @dev A record of states for signing / validating signatures mapping(address => uint256) public nonces; /// @dev An event thats emitted when an account changes its delegate event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate); /// @dev An event thats emitted when a delegate account's vote balance changes event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance); /** * @dev Delegate votes from `msg.sender` to `delegatee` * @param delegator The address to get delegatee for */ function delegates(address delegator) external view returns (address) { return _delegates[delegator]; } /** * @dev Delegate votes from `msg.sender` to `delegatee` * @param delegatee The address to delegate votes to */ function delegate(address delegatee) external { return _delegate(msg.sender, delegatee); } /** * @dev Delegates votes from signatory to `delegatee` * @param delegatee The address to delegate votes to * @param nonce The contract state required to match the signature * @param expiry The time at which to expire the signature * @param v The recovery byte of the signature * @param r Half of the ECDSA signature pair * @param s Half of the ECDSA signature pair */ function delegateBySig( address delegatee, uint256 nonce, uint256 expiry, uint8 v, bytes32 r, bytes32 s ) external { bytes32 domainSeparator = keccak256( abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name())), getChainId(), address(this)) ); bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry)); bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash)); address signatory = ecrecover(digest, v, r, s); require(signatory != address(0), "PAD::delegateBySig: invalid signature"); require(nonce == nonces[signatory]++, "PAD::delegateBySig: invalid nonce"); require(now <= expiry, "PAD::delegateBySig: signature expired"); return _delegate(signatory, delegatee); } /** * @dev Gets the current votes balance for `account` * @param account The address to get votes balance * @return The number of current votes for `account` */ function getCurrentVotes(address account) external view returns (uint256) { uint32 nCheckpoints = numCheckpoints[account]; return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0; } /** * @dev Determine the prior number of votes for an account as of a block number * @dev Block number must be a finalized block or else this function will revert to prevent misinformation. * @param account The address of the account to check * @param blockNumber The block number to get the vote balance at * @return The number of votes the account had as of the given block */ function getPriorVotes(address account, uint256 blockNumber) external view returns (uint256) { require(blockNumber < block.number, "PAD::getPriorVotes: not yet determined"); uint32 nCheckpoints = numCheckpoints[account]; if (nCheckpoints == 0) { return 0; } // First check most recent balance if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) { return checkpoints[account][nCheckpoints - 1].votes; } // Next check implicit zero balance if (checkpoints[account][0].fromBlock > blockNumber) { return 0; } uint32 lower = 0; uint32 upper = nCheckpoints - 1; while (upper > lower) { uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow Checkpoint memory cp = checkpoints[account][center]; if (cp.fromBlock == blockNumber) { return cp.votes; } else if (cp.fromBlock < blockNumber) { lower = center; } else { upper = center - 1; } } return checkpoints[account][lower].votes; } function _delegate(address delegator, address delegatee) internal { address currentDelegate = _delegates[delegator]; uint256 delegatorBalance = balanceOf(delegator); // balance of underlying CAKEs (not scaled); _delegates[delegator] = delegatee; emit DelegateChanged(delegator, currentDelegate, delegatee); _moveDelegates(currentDelegate, delegatee, delegatorBalance); } function _moveDelegates( address srcRep, address dstRep, uint256 amount ) internal { if (srcRep != dstRep && amount > 0) { if (srcRep != address(0)) { // decrease old representative uint32 srcRepNum = numCheckpoints[srcRep]; uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0; uint256 srcRepNew = srcRepOld.sub(amount); _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew); } if (dstRep != address(0)) { // increase new representative uint32 dstRepNum = numCheckpoints[dstRep]; uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0; uint256 dstRepNew = dstRepOld.add(amount); _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew); } } } function _writeCheckpoint( address delegatee, uint32 nCheckpoints, uint256 oldVotes, uint256 newVotes ) internal { uint32 blockNumber = safe32(block.number, "PAD::_writeCheckpoint: block number exceeds 32 bits"); if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) { checkpoints[delegatee][nCheckpoints - 1].votes = newVotes; } else { checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes); numCheckpoints[delegatee] = nCheckpoints + 1; } emit DelegateVotesChanged(delegatee, oldVotes, newVotes); } function safe32(uint256 n, string memory errorMessage) internal pure returns (uint32) { require(n < 2**32, errorMessage); return uint32(n); } function getChainId() internal pure returns (uint256) { uint256 chainId; assembly { chainId := chainid() } return chainId; } }
Contract ABI
[{"type":"event","name":"Approval","inputs":[{"type":"address","name":"owner","internalType":"address","indexed":true},{"type":"address","name":"spender","internalType":"address","indexed":true},{"type":"uint256","name":"value","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"DelegateChanged","inputs":[{"type":"address","name":"delegator","internalType":"address","indexed":true},{"type":"address","name":"fromDelegate","internalType":"address","indexed":true},{"type":"address","name":"toDelegate","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"DelegateVotesChanged","inputs":[{"type":"address","name":"delegate","internalType":"address","indexed":true},{"type":"uint256","name":"previousBalance","internalType":"uint256","indexed":false},{"type":"uint256","name":"newBalance","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"Transfer","inputs":[{"type":"address","name":"from","internalType":"address","indexed":true},{"type":"address","name":"to","internalType":"address","indexed":true},{"type":"uint256","name":"value","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"view","outputs":[{"type":"bytes32","name":"","internalType":"bytes32"}],"name":"DELEGATION_TYPEHASH","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bytes32","name":"","internalType":"bytes32"}],"name":"DOMAIN_TYPEHASH","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"allowance","inputs":[{"type":"address","name":"owner","internalType":"address"},{"type":"address","name":"spender","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"approve","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"balanceOf","inputs":[{"type":"address","name":"account","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint32","name":"fromBlock","internalType":"uint32"},{"type":"uint256","name":"votes","internalType":"uint256"}],"name":"checkpoints","inputs":[{"type":"address","name":"","internalType":"address"},{"type":"uint32","name":"","internalType":"uint32"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint8","name":"","internalType":"uint8"}],"name":"decimals","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"decreaseAllowance","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"subtractedValue","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"delegate","inputs":[{"type":"address","name":"delegatee","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"delegateBySig","inputs":[{"type":"address","name":"delegatee","internalType":"address"},{"type":"uint256","name":"nonce","internalType":"uint256"},{"type":"uint256","name":"expiry","internalType":"uint256"},{"type":"uint8","name":"v","internalType":"uint8"},{"type":"bytes32","name":"r","internalType":"bytes32"},{"type":"bytes32","name":"s","internalType":"bytes32"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"delegates","inputs":[{"type":"address","name":"delegator","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getCurrentVotes","inputs":[{"type":"address","name":"account","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"getOwner","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getPriorVotes","inputs":[{"type":"address","name":"account","internalType":"address"},{"type":"uint256","name":"blockNumber","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"increaseAllowance","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"addedValue","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"mint","inputs":[{"type":"address","name":"_to","internalType":"address"},{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"mint","inputs":[{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"string","name":"","internalType":"string"}],"name":"name","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"nonces","inputs":[{"type":"address","name":"","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint32","name":"","internalType":"uint32"}],"name":"numCheckpoints","inputs":[{"type":"address","name":"","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"string","name":"","internalType":"string"}],"name":"symbol","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"totalSupply","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"transfer","inputs":[{"type":"address","name":"recipient","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"transferFrom","inputs":[{"type":"address","name":"sender","internalType":"address"},{"type":"address","name":"recipient","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]}]
Deployed ByteCode
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